Prototyping - small series

Sch & PCB design, CAD design, Software & Firmware, Assembly, Fieldtests

Projects   are all prototyping activities of ANSARI in electronic and software fields, which can be traced and formed by your needs, while the development is running.

Ansari’s team are engaged in many projects. We design prototypes with a project centric approach where budgets, timelines and quality are constant factors that govern the delivery of the project.

We invite you to share your thoughts and comments about our ongoing projects, submit your ideas and possible projects for our review.  We will be glad to discuss not only feasibility but all the constraints of a given project with you and look forward to finding ways to realize your projects.

If you have a product which needs to be engineered and designed to prototype stage our experience and expertise can be put to use.  We can do the work as contract specialists or participate in many ways that would help your grow your ideas and projects into marketable products.

Please feel free and use our contact form to initiate the first step!


VoxiCase

»Posted on 14. Jul 2013

VoxiCase

 

VoxiCase is a new innovative case for the iPhone 4, adding several features to the iPhone. The project includes the whole product development including mechanics, electronics, firmware and some basic software for accessing the hardware features.

read more

ACU6 – Controller Unit Type 6

»Posted on 11. Jan 2013

ACU6 – Controller Unit Type 6

 

ANSARI’s Controlling Unit – Type 6 (ACU6) is designed to build a sensor and/or actor module in the field to cover many customer requirements in a very small form factor. One of the major advantages of this module is the ability to communicate over the power line with speeds up to 57600 baud.

read more

ACU2 – Controller Unit Type 2

»Posted on 9. Jan 2013

ACU2 – Controller Unit Type 2

Buy this item Online

ANSARI’s Controlling Unit – Type 2 (ACU2) is designed to be an interface for various sensor types. It is capable of storing sensor data locally using an onboard serial Flash with 4 MByte of capacity. Together with each record, the ACU2 can also store a time stamp and the temperature of the sensor at recording time.

read more

ACU3 – Controller Unit Type 3

»Posted on 24. Jul 2012

ACU3 – Controller Unit Type 3

 

ANSARI’s Controlling Unit – Type 3 (ACU3) is a real multi-core module containing one DSP and two MCU-RISC processors building two System-on-Chip (SoC) sections. Both systems operate fully independent of each other and may supervisor the whole module healthiness, making the module very suitable for highly reliable applications …

read more

EMU1node – Carrier Board

»Posted on 24. Jul 2012

EMU1node – Carrier Board

 

EMU1node – Carrier Board is an electronic module for a host system, offering required interfacing to 110V/220V AC-power lines to control and monitor any load up to 2500W
(~12 Amp) using MOSFETs.

The EMU1node – Carrier Board is designed to carry the ACU3 or ACU4 modules as its host.

read more

EMU1node – Introduction

»Posted on 21. Dec 2011

EMU1node – Introduction

 

EMU1node (Energy Management Unit, Type 1 node) is a stand-alone device designed to be used for controlling and monitoring of any load up to 2500W (~12 Amp) on 110V/220V with following features:

  1. Remote control via iPhone/iPad
  2. Switching AC-power (ON/OFF/DIM)
  3. Power metering, timer, alarm, automatic fuse, etc.

read more

ComLinkB – Introduction

»Posted on 20. Dec 2011

ComLinkB – Introduction

 

ComLinkB (Communication Link over Bluetooth) is a hardware module designed to build a gateway between an iPhone/iPad or PC/Laptop and an embedded system.

ComLinkB module acts as an adapter between two endpoints and depending on which combination of hardware interfaces are used several Bluetooth link modes are available…

read more